Nissan Rogue Service Manual: Sunshade
Removal and Installation
REMOVAL
- Remove the moonroof unit assembly. Refer to RF-53, "Removal and Installation".
- Place the moonroof unit assembly (1) on a flat surface upside down and remove sunshade (2) screws (A).
- Manually move sunshade motor (1) using suitable tool (2).
- After manually moving sunshade with suitable tool, gently pull reward on sunshade to reveal cable.
- While holding black plastic part on the cable end push sunshade toward opposite end releasing from the cable.
- Remove sunshade.
INSTALLATION
Installation is in the reverse order of removal.
Moonroof unit assembly
Inspection
WIND DEFLECTOR
Open glass lid fully.
Visually check for proper installation, damaged/deteriorated components,
or foreign objects within mechanism.
Correct as required for smooth ...
Sunshade motor assembly
Removal and Installation
REMOVAL
Remove the headlining. Refer to. INT-30, "Removal and Installation".
Disconnect the harness connector (A) from the sunshade motor
assemb ...
Other materials:
Wiring diagram
NVIS
Wiring Diagram
VEHICLE SECURITY SYSTEM
Wiring Diagram
...
Symptom diagnosis
AUDIO SYSTEM
Symptom Table
RELATED TO AUDIO
Symptoms
Check items
Probable malfunction location
The disk cannot be removed
Audio unit
Malfunction in audio unit.
Refer to AV-18, "On Board Diagnosis Function".
No sound comes out or the le ...
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”,
used along
with a front seat belt, helps to reduce the risk or severity of injury to the
...
