Nissan Rogue Service Manual: Steering angle sensor
Exploded View
- Combination switch
- Steering angle sensor
- Spiral cable
Removal and Installation
Removal and Installation
- Remove the spiral cable. Refer to SR-15, "Exploded View".
- Remove screws (A) and then remove steering angle sensor (1).
INSTALLATION
Installation is in the reverse order of removal.
VDC off switch
Removal and Installation
REMOVAL
Remove the instrument lower panel LH. Refer to IP-14, "INSTRUMENT
PANEL ASSEMBLY : Removal
and Installation".
Release pawls using sui ...
Steering
...
Other materials:
EPS warning lamp does not turn on
Description
EPS warning lamp does not turn ON when turning ignition switch ON from OFF.
(Check the illumination of the
EPS warning lamp.)
Diagnosis Procedure
1.CHECK EPS WARNING LAMP
Perform the trouble diagnosis of EPS warning lamp. Refer to STC-28,
"Diagnosis Procedure".
Is t ...
System description
STRUCTURE AND OPERATION
Sectional View
Drive gear
Side bearing
Differential case
Pinion mate shaft
Side gear
Pinion mate gear
Drive pinion
Collapsible spacer
AWD solenoid
Stud bolt
Electric controlled coupling
Pinion front bearing
Pinion rear bearing
Elect ...
Engine coolant
Inspection
LEVEL
Check that the reservoir tank engine coolant level is within the
“MIN” to “MAX” when the engine is cool.
(A) : MAX
(B) : MIN
Adjust the engine coolant level if necessary.
CAUTION:
Refill Genuine NISSAN Long Life Antifreeze/Coolant (blue) or
equiva ...
