Nissan Rogue Owners Manual: Securing the load

Nissan Rogue Owners Manual / Technical and consumer information / Vehicle loading information / Securing the load

Cargo area luggage hooks

There are luggage hooks located in the cargo area as shown. The hooks can be used to secure cargo with ropes or other types of straps.

Do not apply a total load of more than 6.5 lbs. (29 N) to a single metal floor hook when securing cargo.

WARNING

Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or collision, unsecured cargo could cause personal injury.
The child restraint top tether strap may be damaged by contact with items in the cargo area. Secure any items in the cargo area. Your child could be seriously injured or killed in a collision if the top tether strap is damaged.
Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can break, tire damage could occur, or it can change the way your vehicle handles. This could result in loss of control and cause personal injury.

Vehicle load capacity

Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. Both the GVWR and GAWR are located ...

Loading tips

The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S. certification label. Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR. ...

Other materials:

C1604 torque sensor
DTC Logic DTC DETECTION LOGIC DTC Display item Malfunction detected condition Possible cause C1604 TORQUE SENSOR When torque sensor output signal is malfunctioning. Harness or connector Torque sensor EPS control unit ...

Unit disassembly and assembly
COMBINATION METER Exploded View Combination meter Combination meter lens Pawl Disassembly and Assembly CAUTION: Do not touch the display, pointer, inside of combination meter or the printed area of the dial during disassembly or assembly. Keep away from magn ...

Steering column
Exploded View Steering column Floor cover Floor seal Removal and Installation CAUTION: Any time the ignition switch has been disconnected, removed or installed, the keys must be re-registered in the BCM. Refer to CONSULT operations manual. Do not ...