Nissan Rogue Service Manual: Removal and installation

System description

VENTILATION SYSTEM System Description OUTLINE Automatic A/C The ventilation system is controlled by the A/C switch assembly. For details of the automatic air conditioner system, refer to HAC-10 ...

Ducts and grilles

Exploded View Side defroster duct (RH) Defroster nozzle Side defroster duct (LH)  Center ventilator duct Heating and cooling unit assembly  Front foot duct (LH) Front ...

Other materials:

Diagnosis and repair work flow
Work Flow NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

Cooling fan
Component Function Check 1.CHECK COOLING FAN FUNCTION With CONSULT  Turn ignition switch ON.  Perform “COOLING FAN (DUAL)” in “ACTIVE TEST” mode of “IPDM E/R” using CONSULT.  Touch “LOW”, “HI” on the CONSULT screen.  Check that cooling fan opera ...

Basic inspection
COMPONENT INSPECTION Inspection AFTER A COLLISION WARNING: Inspect all seat belt assemblies including retractors and attaching hardware after any collision. NISSAN/INFINITI recommends that all seat belt assemblies in use during a collision be replaced unless the collision was minor and t ...