Nissan Rogue Service Manual: Removal and installation

Basic inspection

COMPONENT INSPECTION Inspection AFTER A COLLISION WARNING: Inspect all seat belt assemblies including retractors and attaching hardware after any collision. NISSAN/INFINITI recommends that al ...

Front seat belt

Exploded View Seat belt height adjuster (RH) Seat belt height adjuster bolt cover (RH) Seat belt retractor (RH) Seat belt buckle (RH) Seat belt buckle (LH) Seat belt retractor ( ...

Other materials:

Cowl top
Exploded View Cowl top side trim cover (RH) Cowl top cover screen  Cowl top cover seal  EPT seal Cowl top cover plug Cowl top cover Cowl top cover mask Cowl top extension seal Cowl top extension Cowl top insulation Cowl top side trim cover (LH) Removal ...

Removal and installation
ACCELERATOR PEDAL ASSEMBLY Exploded View Brake pedal Accelerator pedal assembly  Locator hook  Locator pin Bolt Removal and Installation REMOVAL  Disconnect the harness connector from the accelerator pedal assembly.  Remove the bolts, then rem ...

Basic inspection
CONFIGURATION (CAN GATEWAY) Work Procedure 1.WRITING MODE SELECTION CONSULT Configuration Select “Re/programming, Configuration” of CAN gateway. When writing saved data>>GO TO 2. When writing manually>>GO TO 3. 2.PERFORM “AFTER REPLACE ECU” OF “READ / WRITE CONFIGURA ...