Nissan Rogue Service Manual: Removal and installation

Steering gear and linkage

Inspection BOOT Check boot for cracks. Replace if any damage is found. OUTER SOCKET AND INNER SOCKET Boot  Check boot for cracks, and replace it if a malfunction is detected. Gear H ...

Steering wheel

Exploded View Steering wheel Removal and Installation REMOVAL  Set the front wheels and tires in the straight-ahead position.  Remove driver air bag module. Refer to SR-12, ...

Other materials:

DTC/circuit diagnosis
P1610 LOCK MODE Description ECM forcibly switches to the mode that inhibits engine start, when engine start operation is performed 5 times or more while communication between ECM and BCM is not normal. DTC Logic DTC DETECTION LOGIC NOTE:  If DTC B1610 is displayed with DTC U1000, fi ...

Readiness for inspection/maintenance (I/M) test
WARNINGA vehicle equipped with All -Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or similar equipment. Make sure you inform the test facility personnel that your vehicle is equipp ...

P0075 intake valve timing control
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0075 INT/V TIM V/CIR-B1 (Intake valve control solenoid circuit bank 1) ECM detects an abnormal voltage in the intake valve timing co ...