Nissan Rogue Service Manual: Removal and installation

The ambient temperature display is incorrect

Description The displayed outside air temperature is higher than the actual temperature.  The displayed outside air temperature is lower than the actual temperature.  Outside a ...

Combination meter

Removal and Installation REMOVAL  Disconnect the negative battery terminal. Refer to PG-77, "Removal and Installation".  Remove the cluster lid A. Refer to IP-20, "R ...

Other materials:

C1769 configuration setting
DTC Description This procedure must be performed:  After replacement of BCM. DTC DETECTION LOGIC DTC Display Item Malfunction detected condition C1769 CONFIG SETTING (Configuration setting) Tire air pressure monitoring system configuration cannot be p ...

P0967 pressure control solenoid B
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0967 PC SOLENOID B (Pressure Control Solenoid B Control Circuit High) When all of the following conditions are satisfied and this state is main ...

Sensor maintenance
Sensor maintenance The distance sensor for the FCW system A is located behind the front bumper. To keep the FCW system operating properly, be sure to observe the following:  Always keep the sensor area of the front bumper clean.  Do not strike or damage the areas around ...