Nissan Rogue Service Manual: Removal and installation

Body component parts

Underbody Component Parts Both sided anti-corrosive precoated steel portions High strength steel (HSS) portions: 440 MPa Both sided anti-corrosive steel and HSS portions: 440 MPa CA ...

Corrosion protection

Description To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in NISSAN production plants. When repairing or replacing body panels, it is nece ...

Other materials:

Roof side molding
Exploded View Roof side molding Back door hinge cover Metal clip Pawl Removal and Installation REMOVAL  Release roof side molding (1) using suitable tool (A) then remove roof side molding. : Metal clip CAUTION: Apply protective tape (B) around the roof side moldi ...

Battery
Keep the battery surface clean and dry. Clean the battery with a solution of baking soda and water.  Make certain the terminal connections are clean and securely tightened.  If the vehicle is not to be used for 30 days or longer, disconnect the negative (-) battery termina ...

Rear window defogger relay
Description Power is supplied to the rear window defogger with BCM control. Component Function Check 1. CHECK REAR WINDOW DEFOGGER RELAY POWER SUPPLY CIRCUIT Check that an operation noise of rear window defogger relay [located in fuse block (J/B)] can be heard when turning the rear window def ...