Nissan Rogue manuals

Nissan Rogue Service Manual: Rear window defogger switch

WITH MANUAL A/C

WITH MANUAL A/C : Description

WITH MANUAL A/C : Component Function Check

1. CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION

Check that the indicator lamp of the rear window defogger switch illuminates when rear window defogger switch is ON.

Is the inspection result normal? YES >> Rear window defogger switch function is OK.

NO >> Refer to DEF-22, "WITH MANUAL A/C : Diagnosis Procedure".

WITH MANUAL A/C : Diagnosis Procedure

Regarding Wiring Diagram information, refer to DEF-12, "Wiring Diagram".

1.CHECK REAR WINDOW DEFOGGER SWITCH OPERATION

With CONSULT

  1.  Select “REAR DEFOGGER” of “BCM” using CONSULT.
  2.  Select “REAR DEF SW” in “Data Monitor” mode.
  3.  Check “REAR DEF SW” indication under the following conditions.

Check rear window defogger switch operation

Is the inspection result normal? YES >> Rear window defogger switch is OK.

NO >> Replace front air control. Refer to HAC-181, "Removal and Installation".

WITH AUTO A/C

WITH AUTO A/C : Description

WITH AUTO A/C : Component Function Check

1. CHECK REAR WINDOW DEFOGGER SWITCH FUNCTION

Check that the indicator lamp of the rear window defogger switch illuminates when rear window defogger switch is ON.

Is the inspection result normal? YES >> Rear window defogger switch function is OK.

NO >> Refer to DEF-22, "WITH MANUAL A/C : Diagnosis Procedure".

WITH AUTO A/C : Diagnosis Procedure

Regarding Wiring Diagram information, refer to DEF-12, "Wiring Diagram".

1.CHECK REAR WINDOW DEFOGGER SWITCH OPERATION

With CONSULT

  1.  Select “REAR DEFOGGER” of “BCM” using CONSULT.
  2.  Select “REAR DEF SW” in “Data Monitor” mode.
  3.  Check “REAR DEF SW” indication under the following conditions.

Check rear window defogger switch operation

Is the inspection result normal? YES >> Rear window defogger switch is OK.

NO >> Replace A/C switch. Refer to HAC-102, "Removal and Installation".

DTC/circuit diagnosis
...

Rear window defogger relay
Description Power is supplied to the rear window defogger with BCM control. Component Function Check 1. CHECK REAR WINDOW DEFOGGER RELAY POWER SUPPLY CIRCUIT Check that an operation noise of rear ...

Other materials:

Lifting point
Special service tool The actual shapes of Kent-Moore tools may differ from those of special service tools illustrated here. Tool number (Kent-Moore No.) Tool name Description LM4086-0200 ( - ) Board on attachment LM4519-0000 ( - ) Safety stan ...

P0335 CKP sensor (POS)
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting conditio P0335 CKP SEN/CIRCUIT (Crankshaft position sensor ″A″ circuit) The crankshaft position sensor (POS) signal is not detected by ...

DTC/circuit diagnosis
P1610 LOCK MODE Description ECM forcibly switches to the mode that inhibits engine start, when engine start operation is performed 5 times or more while communication between ECM and BCM is not normal. DTC Logic DTC DETECTION LOGIC NOTE:  If DTC B1610 is displayed with DTC U1000, fi ...

© 2014-2025 Copyright www.nirogue.com