Nissan Rogue manuals

Nissan Rogue Service Manual: Rear suspension assembly

Inspection and Adjustment

COMPONENT PART

Check the conditions (looseness, backlash) of each component and component conditions (wear, damage) are normal.

SHOCK ABSORBER

Check the shock absorber for oil leaks or damage. Replace the components if necessary.

Periodic maintenance
...

Wheel alignment
Inspection DESCRIPTION  Measure wheel alignment under unladen conditions. NOTE: “Unladen conditions” means that fuel, engine coolant, and lubricants are full. Spare tire, jack, ha ...

Other materials:

Fuses
Two types of fuses are used. Type A is used in the fuse boxes in the engine compartment. Type B is used in the passenger compartment fuse box. Type A fuses are provided as spare fuses. They are stored in the passenger compartment fuse box. Type A fuses can be installed in the engine co ...

CAN system (type 3)
MAIN LINE BETWEEN IPDM-E AND DLC CIRCUIT Diagnosis Procedure 1.CHECK CONNECTOR  Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal.  Check the following terminals and connectors for damage, bend and loose connection (connector side and harn ...

System description
DESCRIPTION Engine Cooling System Thermostat Water outlet Cylinder block (Thermostat housing)  Water inlet Radiator  Water pump  Cylinder block  Cylinder head  Open  Closed To electric throttle control actuator To oil cooler ...

© 2014-2022 Copyright www.nirogue.com