Nissan Rogue Owners Manual: Push-button ignition switch positions
LOCK (Normal parking position):
The ignition switch can only be locked in this position.
The ignition switch will lock when any door is opened or closed with the ignition switched off.
ON (Normal operating position):
This position turns on the ignition system and electrical accessories.
ON has a battery saver feature that will turn the ignition switch to the OFF position, if the vehicle is not running, after some time under the following conditions:
- all doors are closed.
- shift lever is in P (Park).
The battery saver feature will be cancelled if any of the following occur:
- any door is opened.
- shift lever is moved out of the P (Park) position.
- ignition switch changes position.
| CAUTION Do not leave the vehicle with the ignition switch in the ON position when the engine is not running for an extended period. This can discharge the battery. |
OFF:
The ignition switch is in the OFF position when the engine is turned off using the ignition switch.
No lights will illuminate on the ignition switch.
AUTO ACCESSORY:
With the vehicle in the P (Park) position, the Intelligent key with you and the ignition placed from ON to OFF, the radio can still be used for a period of time, or until the driver’s door is opened.
After a period of time, functions such as radio, navigation, and Bluetooth® Hands-Free Phone System may be restarted by pressing the “POWER button/ VOLUME control knob”. For additional information, refer to “Monitor, climate, audio, phone and voice recognition systems” in this manual or the keyfob unlock button up to a total of 30 minutes.
Emergency engine shut off
To shut off the engine in an emergency situation while driving, perform the following procedure:
- Rapidly push the push-button ignition switch three consecutive times in less than 1.5 seconds, or
- Push and hold the push-button ignition switch for more than 2 seconds.
Operating range
Operating range
The Intelligent Key functions can only be used
when the Intelligent Key is within the specified
operating range.
When the Intelligent Key battery is almost discharged
or str ...
NISSAN Intelligent Key® battery discharge
(if so equipped)
NISSAN Intelligent Key® battery discharge
If the battery of the NISSAN Intelligent Key® is
discharged, or environmental conditions interfere
with the Intelligent Key operation, start the engi ...
Other materials:
The low washer fluid warning continues displaying, or
does not display
Description
The warning is still displayed even after washer fluid is added.
The warning is not displayed even though the washer tank is empty.
Diagnosis Procedure
1.CHECK WASHER FLUID LEVEL SWITCH SIGNAL CIRCUIT
Check the washer fluid level switch signal circuit. Refer to MWI-71,
" ...
Calibration of decel G sensor
Description
CAUTION:
Always perform the decel G sensor calibration before driving when the following
operation is performed.
NOTE:
Yaw rate/side/decel G sensor calibration is performed when performing the decel
G sensor calibration.
Work Procedure
Decel G sensor calibration
CAUTION: ...
Wiring diagram
CHASSIS CONTROL
Wiring Diagram
...
