Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Nissan Rogue Service Manual / Ventilation, heater & air conditioner / Heater & Air Conditioning System / Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description
— (J-41425-NIS) Aluminum tube repair kit

Repairing leaks in A/C tube
— (J-38873-A) Drive plate installer

Installing pulley

Commercial Service Tool

(TechMate No.) Tool name

Description
(J-41810-NI) Refrigerant identifier equipment (R- 134a)

For checking refrigerant purity and system contamination
( — ) Power Tool

Loosening nuts, screws and bolts
— (J-48710) NISSAN ACR2009 RRR Unit

Refrigerant recovery, recycling and recharging
— (J-41995) Electronic refrigerant leak detector

Power supply:
  •  DC 12V (battery terminal)
— (J-43926) Refrigerant dye leak detection kit Kit includes:
(J-42220) UV lamp and UV safety goggles
(J-41459) Refrigerant dye injector
(J-41447) Fluorescent leak detection dye (box of 24, 1/4 ounce bottles)
(J-43872) Refrigerant dye cleaner

Power supply:
  •  DC 12V (battery terminal)
— (J-39183-C) Manifold Gauge Set (with hoses and couplers)

Identification:
  •  The gauge face indicates R-134a.

    Fitting size-Thread size

  •  1/2”-16 ACME
Service Hoses:
  •  High side hose (J-39500-72B)
  •  Low side hose (J-39500-72R)
  •  Utility hose (J-39500-72Y)

Hose color:
  •  Low side hose: Blue with black stripe
  •  High side hose: Red with black stripe
  •  Utility hose: Yellow with black stripe or green with black stripe Hose fitting to gauge:
  •  1/2”-16 ACME
Service couplers
  •  High side coupler (J-39500-20A)
  •  Low side coupler (J-39500-24A)

Hose fitting to service hose:
  •  M14 x 1.5 fitting is optional or permanently attached.
— (J-39699) Refrigerant Weight Scale

For measuring of refrigerant Fitting size-Thread size
  •  1/2”-16 ACME
— (J-39649) Vacuum Pump (Including the isolator valve)

Capacity:
  •  Air displacement: 4 CFM
  •  Micron rating: 20 microns
  •  Oil capacity: 482 g (17 oz) Fitting size-Thread size
  •  1/2”-16 ACME
— (J-46534) Trim Tool Set

Removing trim components

Sealant and/or Oil

Tool number (TechMate No.) Tool name

Description
— ( — ) HFC-134a (R-134a) Refrigerant

Container color: Light blue Container marking: HFC-134a (R- 134a) Fitting size: Thread size
  •  large container 1/2”-16 ACME
— ( — ) ND-OIL 8

Type: Nippon Denso Oil 8 (ND-OIL 8) Application: HFC-134a (R-134a)
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
...

Other materials:

U1010 control unit (CAN)
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction Detected Condition Possible cause U1010 CONTROL UNIT (CAN) BCM detected internal CAN communication circuit malfunction. BCM Diagnosis Procedure 1.REPLACE BCM When DTC “U1010” is detected, repla ...

Wiring diagram
MOONROOF SYSTEM Wiring Diagram ...

Forward-facing child restraint installation using the seat belts
WARNINGThe three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a c ...

© 2014-2025 Copyright www.nirogue.com