Nissan Rogue Service Manual: Preparation
Special Service Tool
The actual shape of the tool may differ from those illustrated here.
|
Tool number (TechMate No.) Tool name |
Description |
|
| KV991J0080 (J-45741) ABS active wheel sensor tester |
|
Checking operation of ABS active wheel sensors |
Commercial Service Tools
| Tool name | Description | |
| 1. Flare nut crowfoot 2. Torque wrench |
|
Removing and installing brake piping a: 10 mm (0.39 in)/12 mm (0.47 in) |
| Power tool |
|
Loosening nuts, screws and bolts |
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT
BELT
PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...
Other materials:
Parking brake rear cable
Removal and Installation
REMOVAL
Remove the center console assembly. Refer to IP-18, "Removal and
Installation".
Remove shift selector. Refer to TM-194, "Removal and
Installation".
Remove the bolts from the parking brake front cable mount. Refer
...
Periodic maintenance
HEADLAMP AIMING ADJUSTMENT
Inspection
PREPARATION BEFORE ADJUSTING
Before performing aiming adjustment, check the following:
Make sure all tires are inflated to correct pressure.
Place vehicle and screen on level surface.
Make sure there is no load in vehicle other than ...
Refrigeration system symptoms
Trouble Diagnosis For Unusual Pressure
Diagnose using a manifold gauge whenever system’s high and/or low side
pressure(s) is/are unusual. The
marker above the gauge scale in the following tables indicates the standard
(usual) pressure range. Refer to
above table (Ambient air temperature-to- ...
