Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name Description
KV38100500 ( — ) Drift

Installing sensor rotor
a: 80 mm (3.15 in) dia.
b: 60 mm (2.36 in) dia.
KV40101840 ( — ) Collar

Installing sensor rotor
a: 67 mm (2.64 in) dia.
b: 85 mm (3.35 in) dia.

Commercial Service Tool

Tool name

Description

Ball joint remover

Removing wheel stud
Power tools

Loosening nuts, screws, and bolts
Drive shaft puller

Removing drive shaft joint sub assembly
Sliding hammer

Removing drive shaft
Replacer

Removing sensor rotor
Puller

Removing sensor rotor
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

Symptom diagnosis
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING NVH Troubleshooting Chart Use chart below to find the cause of the symptom. If necessary, repair or replace these parts. ×: Applicable ...

Other materials:

P1226 TP sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P1226 CTP LEARNING-B1 (CTP LEARNING-B1) Closed throttle position learning is not performed successfully, repeatedly POSSIBLE CAUSE Elect ...

C1111 pump motor
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1111 PUMP MOTOR When a malfunction is detected in motor or motor relay. Harness or connector  ABS actuator and electric unit (control unit) &nb ...

Outside mirrors
Outside mirrors The outside mirror remote control will operate only when the ignition switch is in the ACC or ON position. Move the small switch 1 to select the right or left mirror. Adjust each mirror to the desired position using the large switch 2 . WARNING  Objects v ...

© 2014-2022 Copyright www.nirogue.com