Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Commercial Service Tool

Tool name

Description

Ball joint remover

Removing wheel stud
Power tools

Loosening nuts, screws, and bolts
Precaution
Precautions Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT ...

Symptom diagnosis
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING NVH Troubleshooting Chart Use chart below to find the cause of the symptom. If necessary, repair or replace these parts. ×: Applicable ...

Other materials:

U0102 lost communication (Transfer)
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition U0102 LOST COMM (TRANSFER) (Lost Communication With Transfer Case Control Module) When the ignition switch is ON, TCM is unable to receive the CAN ...

P1078 EVT control position sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P1078 EXH TIM SEN/CIRC-B1 (EXH TIM SEN/CIRC-B1) An excessively high or low voltage from the sensor is sent to ECM. POSSIBLE CAUSE  H ...

Accelerator pedal released position learning
Description Accelerator Pedal Released Position Learning is a function of ECM to learn the fully released position of the accelerator pedal by monitoring the accelerator pedal position sensor output signal. It must be performed each time harness connector of accelerator pedal position sensor ...

© 2014-2025 Copyright www.nirogue.com