Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name Description
KV40107300 ( — ) Boot band crimping tool

Installing boot band
KV40107500 ( — ) Drive shaft attachment

Removing drive shaft
KV38107900 ( — ) Protector

Installing drive shaft
a: 32 mm (1.26 in) dia.

Commercial Service Tools

Tool name Description
Ball joint remover

Removing wheel stud
Drive shaft puller

Removing drive shaft joint sub assembly
Sliding hammer

Removing drive shaft
Power tool

Loosening nuts, screws and bolts
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

Symptom diagnosis
NOISE, VIBRATION AND HARSHNESS (NVH) TROUBLESHOOTING NVH Troubleshooting Chart Use chart below to find the cause of the symptom. If necessary, repair or replace these parts. ×: Applicable ...

Other materials:

P0335 CKP sensor (POS)
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting conditio P0335 CKP SEN/CIRCUIT (Crankshaft position sensor ″A″ circuit) The crankshaft position sensor (POS) signal is not detected by ...

Tire pressure
Tire Pressure Monitoring System (TPMS) WARNINGRadio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the possible influences before use This vehicle is equipped with TPMS. It m ...

Inspection and adjustment
ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT : Special Repair Requirement INITIALIZATION PROCEDURE Moonroof If the moonroof does not open or close automatically, use the following procedure to return moonroof operation to normal.  Tu ...

© 2014-2022 Copyright www.nirogue.com