Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tools

The actual shapes of TechMate tools may differ from those of special service tools illustrated here.

Tool number (TechMate No.) Tool name Description
1. KV311039S0 ( — ) Charging pipe set
2. KV31103920* ( — ) O-ring

CVT fluid changing and adjustment
KV38107900 ( — ) Protector a: 32 mm (1.26 in) dia.

Installing drive shaft

*: The O-ring as a unit part is set as a SST.

Commercial Service Tools

Tool number
Tool name
Description
Power tool

Loosening nuts and bolts
Lint-free paper

Cleaning transaxle
Drift
a: 56 mm (2.20 in) dia.
b: 50 mm (1.97 in) dia.

Installing differential side oil seal
Drift
a: 65 mm (2.56 in) dia.
b: 60 mm (2.36 in) dia.

Installing converter housing oil seal
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
...

Other materials:

Removal and installation
FRONT WHEEL HUB Exploded View Wheel hub and bearing  Cotter pin  Nut retainer  Wheel hub lock nut Hub bolt Splash guard  Steering knuckle Removal and Installation REMOVAL  Remove front wheel and tire using power tool. Refer to WT-57, " ...

Fuel recommendation
Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane number 91). CAUTION  Only vehicles with the E-85 filler door label can operate on E-85. Fuel system or other damage can occur if E-85 is used in vehicles t ...

Rear window and outside mirror (if so equipped) defroster switch
To defrost the rear window glass and outside mirrors (if so equipped), start the engine and push the rear window defroster switch on. The rear window defroster indicator light on the switch comes on. Push the switch again to turn the defroster off. The rear window defroster automatically ...

© 2014-2025 Copyright www.nirogue.com