Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Location of plastic parts
Precautions for Plastics CAUTION:  When repairing and painting a portion of the body adjacent to plastic parts, consider their characteristics (influence of heat and solvent) and re ...

Repairing material
Foam Repair During factory body assembly, foam insulators are installed in certain body panels and locations around the vehicle. Use the following procedure(s) to replace any factory-installed foa ...

Other materials:

Specifications
Engine Model QR25DE Type Gasoline, 4-cycle, DOHC Cylinder arrangement 4-cylinder Bore x Stroke in (mm) 3.5 x 3.9 (89.0 x 100.0) Displacement cu in (cm3) 151.82 (2,488) Firing order 1-3-4-2 Idle speed No ...

Controls
Fan control dial The fan control dial turns the fan on and off, and controls fan speed. Air flow control buttons The air flow control buttons allow you to select the air flow outlets. MAX A/C — Air flows mainly from center and side vents with maximum cooling and turns on. — Air flows m ...

DTC/circuit diagnosis
POWER SUPPLY AND GROUND CIRCUIT BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) BCM (BODY CONTROL SYSTEM) (WITH INTELLIGENT KEY SYSTEM) : Diagnosis Procedure Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram". 1. CHECK FUSE Check that the following fuse i ...

© 2014-2022 Copyright www.nirogue.com