Nissan Rogue manuals

Nissan Rogue Service Manual: Preparation

Special Service Tool

The actual shape of the tools may differ from those illustrated here.

Tool number (TechMate No.) Tool name

Description

— (J-46534) Trim Tool Set

Removing trim components

Commercial Service Tools

(TechMate No.) Tool name

Description

( — ) Power tool

Loosening nuts, screws and bolts
Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

System description
...

Other materials:

Connector Symbols
Most of connector symbols in wiring diagrams are shown from the terminal side.  Connector symbols shown from the terminal side are enclosed by a single line and followed by the direction mark.  Connector symbols shown from the harness side are enclosed by a double line and foll ...

Performance test
Inspection INSPECTION PROCEDURE  Connect recovery/recycling/recharging equipment (for HFC-134a) or manifold gauge.  Start the engine, and set to the following condition. Test condition Maintain test condition until A/C system becomes stable. (Approximately 10 minute ...

Structure and operation
TRANSAXLE TRANSAXLE : Cross-Sectional View Converter housing Oil pump Planetary gear Control valve Oil pan Steel belt Primary pulley Secondary pulley Side cover Transaxle case Differential case Final gear Reduction gear Idler gear Output gear Drive sp ...

© 2014-2022 Copyright www.nirogue.com