Nissan Rogue manuals

Nissan Rogue Service Manual: Personal lamp

Removal and Installation

The personal lamp is serviced as part of headlining. Refer to INT-30, "Removal and Installation".

Bulb or Lens Replacement

WARNING: Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns.

CAUTION:

  1.  Insert a suitable tool into the gap between the lens and personal lamp, then gently release the lens pawls and remove.
  2.  Grasp the bulb and pull straight out from its socket to remove.
  3.  Install personal lamp bulb to personal lamp.
  4.  Install the personal lamp lens.
Room lamp
Removal and Installation WARNING: Do not touch the glass surface of a bulb while it is lit or right after being turned OFF to prevent burns. CAUTION:  Do not touch the glass of bulb di ...

Luggage room lamp
Removal and Installation REMOVAL Insert a suitable tool (A) into the gap between the luggage lower finisher (RH) (2) and the top of luggage room lamp (1) to release the pawl. : Pawl ...

Other materials:

Timing chain
Exploded View Cylinder block  Timing chain slack guide  Chain tensioner  Timing chain  Camshaft sprocket (EXH)  Camshaft sprocket (INT)  Oil filter  Front cover O-ring  Oil pressure sensor Valve timing control cover O-rings ...

How to switch the display
With the ignition switch in the ON position, press the CAMERA button or move the shift lever to the R (Reverse) position to operate the Around View Monitor. The Around View Monitor displays different split screen views depending on the position of the shift lever. Press the CAMERA button to ...

P0111 IAT sensor
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0111 IAT SENSOR 1 B1 (Intake air temperature sensor 1 circuit range/performance bank 1) The comparison result of signals transmitted to ECM fro ...

В© 2014-2022 Copyright www.nirogue.com