Nissan Rogue manuals

Nissan Rogue Service Manual: Parking brake switch signal circuit

Component Function Check

1.CHECK PARKING BRAKE SWITCH OPERATION

Check that brake warning lamp in combination meter turns ON/OFF when parking brake is actuated.

Is the inspection result normal? YES >> Inspection End.

NO >> Proceed to diagnosis procedure. Refer to WCS-45, "Diagnosis Procedure".

Diagnosis Procedure

Regarding Wiring Diagram information, refer to WCS-29, "Wiring Diagram".

1.CONNECTOR INSPECTION

  1.  Turn ignition switch OFF.
  2.  Disconnect combination meter and parking brake switch connectors.
  3.  Check connectors and terminals for deformation, disconnection, looseness or damage.

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace as necessary.

2.CHECK PARKING BRAKE SWITCH

Check parking brake switch. Refer to WCS-46, "Component Inspection".

Is the inspection result normal? YES >> GO TO 3.

NO >> Replace parking brake switch. Refer to PB-7, "Exploded View".

3.CHECK PARKING BRAKE SWITCH SIGNAL

With CONSULT.

  1.  Connect combination meter connector and parking brake switch connectors.
  2.  Turn ignition switch ON.
  3.  In DATA MONITOR select "PKB SW" and check parking brake switch signal.

Check parking brake switch signal

Is the inspection result normal? YES >> Refer to WCS-37, "Work Flow".

NO >> GO TO 4.

4.CHECK PARKING BRAKE SWITCH CIRCUIT

  1.  Turn ignition switch OFF.
  2.  Disconnect combination meter and parking brake switch connectors.
  3.  Check continuity between combination meter connector M76 terminal 26 and parking brake switch connector E52 terminal 1.

Check parking brake switch circuit

  1. Check continuity between combination meter connector and ground.

Check parking brake switch circuit

Is the inspection result normal? YES >> Replace combination meter. Refer to MWI-82, "Removal and Installation".

NO >> Repair or replace malfunctioning components.

Component Inspection

1.CHECK PARKING BRAKE SWITCH

  1.  Turn ignition switch OFF.
  2.  Disconnect parking brake switch connector.
  3.  Check continuity between parking brake switch terminal 1 and ground.

Check parking brake switch

Is the inspection result normal? YES >> Inspection End.

NO >> Replace parking brake switch. Refer to PB-7, "Exploded View".

Seat belt buckle switch signal circuit
Description Transmits a seat belt buckle switch signal to the combination meter. Component Function Check 1. CHECK COMBINATION METER INPUT SIGNAL  Ignition ON.  Monitor seat belt wa ...

Key switch signal circuit (without intelligent key)
Description Transmits a key switch signal to the BCM. Component Function Check 1. CHECK BCM INPUT SIGNAL Select "Data Monitor" for "BCM" and check the "KEY ON SW" mon ...

Other materials:

Diagnosis system (IPDM E/R)
CONSULT Function (IPDM E/R) APPLICATION ITEM CONSULT performs the following functions via CAN communication with IPDM E/R. Direct Diagnostic Mode Description Ecu Identification The IPDM E/R part number is displayed. Self Diagnostic Result The IPDM E/R sel ...

Brake booster
Inspection Operation Depress the brake pedal several times at five second intervals with the engine stopped. Start the engine with the brake pedal fully depressed. Check that the clearance between brake pedal and dash lower panel decreases. NOTE: A slight impact with a small click may be fe ...

System
CVT CONTROL SYSTEM CVT CONTROL SYSTEM : System Description SYSTEM DIAGRAM MAIN CONTROL CONTENTS OF TCM Controls Reference Line pressure control TM-36, "LINE PRESSURE CONTROL : System Description" Shift control TM-37, "SHIFT CONTROL : System De ...

В© 2014-2025 Copyright www.nirogue.com