Nissan Rogue Owners Manual: Parking brake

Nissan Rogue Owners Manual / Starting and driving / Parking brake

WARNING

Be sure the parking brake is fully released before driving. Failure to do so can cause brake failure and lead to an accident.
Do not release the parking brake from outside the vehicle.
Do not use the shift lever in place of the parking brake. When parking, be sure the parking brake is fully engaged.
Do not leave children unattended in a vehicle. They could release the parking brake and cause an accident.

Parking brake

To engage: Firmly depress the parking brake.

To release:

Firmly apply the foot brake.
Move the shift lever to the P (Park) position.
Firmly depress the parking brake pedal and it will release.
Before driving, be sure the brake warning light goes out.

Driving the vehicle

CONTINUOUSLY VARIABLE TRANSMISSION (CVT) The Continuously Variable Transmission (CVT) in your vehicle is electronically controlled to produce maximum power and smooth operation. The recommended ...

ECO mode switch (if so equipped)

ECO mode switch The ECO mode helps to enhance the fuel economy by controlling the throttle sensitivity and transmission points. To turn on the ECO mode, push the ECO mode switch. The ECO mo ...

Other materials:

Service data and specifications (SDS)
Steering Wheel Steering Angle Steering Column STEERING COLUMN LENGTH STEERING COLUMN ROTATING TORQUE TILT MECHANISM OPERATING RANGE Steering Gear STEERING OUTER SOCKET AND INNER SOCKET INNER AND OUTER SOCKET LENGTH RACK STROKE RACK SLIDING FORCE ...

Troubleshooting guide
Verify the location of all Intelligent Keys that are programmed for the vehicle. If another Intelligent Key is in range or inside the vehicle, the vehicle system may respond differently than expected. Symptom Possible Cause Remedy When stopping the engine The Shift to Pa ...

Removal and installation
ACCELERATOR PEDAL ASSEMBLY Exploded View Brake pedal Accelerator pedal assembly Locator hook Locator pin Bolt Removal and Installation REMOVAL Disconnect the harness connector from the accelerator pedal assembly. Remove the bolts, then rem ...