Nissan Rogue Service Manual: P1212 TCS communication line

Nissan Rogue Service Manual / Engine / Engine Control System / DTC/Circuit diagnosis / P1212 TCS communication line

Description

This CAN communication line is used to control the smooth engine operation during the TCS operation. Pulse signals are exchanged between ECM and “ABS actuator and electric unit (control unit)”.

Be sure to erase the malfunction information such as DTC not only for “ABS actuator and electric unit (control unit)” but also for ECM after TCS related repair.

DTC Description

DTC DETECTION LOGIC

Freeze frame data is not stored in the ECM for this self-diagnosis.

DTC No.	CONSULT screen terms (Trouble diagnosis content)	DTC detecting condition
P1212	TCS/CIRC (TCS/CIRC)	ECM can not receive the information from “ABS actuator and electric unit (control unit)” continuously.

POSSIBLE CAUSE

Harness or connectors (CAN communication line is open or shorted.)
ABS actuator and electric unit (control unit)
Dead (Weak) battery

FAIL-SAFE

Not applicable

DTC CONFIRMATION PROCEDURE

1.CHECK DTC PRIORITY

If DTC P1217 is displayed with DTC UXXXX or P0607, first perform the trouble diagnosis for DTC UXXXX or P0607.

Is applicable DTC detected? YES >> Perform diagnosis of applicable. Refer to EC-93, "DTC Index".

NO >> GO TO 2.

2.PRECONDITIONING

If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test.

Turn ignition switch OFF and wait at least 10 seconds.
Turn ignition switch ON.
Turn ignition switch OFF and wait at least 10 seconds.

TESTING CONDITION: Before performing the following procedure, confirm that battery voltage is more than 10.5V at idle. >> GO TO 3.

3.PERFORM DTC CONFIRMATION PROCEDURE

Start engine and let it idle for at least 10 seconds.
Check 1st trip DTC.

Is 1st trip DTC detected? YES >> Proceed to EC-395, "Diagnosis Procedure".

NO >> INSPECTION END

Diagnosis Procedure

Perform the trouble diagnosis for TCS. Refer to BRC-66, "Work Flow".

NOTE: If DTC P1212 is displayed with DTC UXXXX and/or P0607, perform the following trouble diagnosis.

Trouble diagnosis for DTC UXXXX Refer to EC-93, "DTC Index".
Trouble diagnosis for DTC P0607 Refer to EC-376, "DTC Description".

P117A air fuel ratio

DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P117A AIR FUEL RATIO B1 (AIR FUEL RATIO B1) ECM ...

P1217 engine over temperature

DTC Description DTC DETECTION LOGIC If the cooling fan or another component in the cooling system malfunctions, engine coolant temperature will rise. When the engine coolant temperature reache ...

Other materials:

CD care and cleaning
Handle a CD by its edges. Do not bend the disc. Never touch the surface of the disc. Always place the discs in the storage case when they are not being used. To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the ...

Second row seats
Exploded View RH SEAT Headrest Seatback upper luggage board Seatback luggage board Seatback trim Seatback pad Recline release cable Seat cushion trim Fold flat strap Seat cushion pad Seat cushion silencer Bolt cover Seat cushion outer f ...

BSW driving situations
Another vehicle approaching from behind The Blind Spot indicator light illuminates if a vehicle enters the detection zone from behind in an adjacent lane. However, if the overtaking vehicle is traveling much faster than your vehicle, the indicator light may not illuminate before the dete ...