Nissan Rogue Service Manual: Operation

Nissan Rogue Service Manual / Driver information & multimedia / Meter, Warning Lamp & Indicator / System description / Operation

Switch Name and Function

STEERING SWITCH

Steering switch

No.	Switch name	Operation	Description
1	Enter/Up/Down switch	Press	The information display settings can be changed.
2	Display switch
3	Back switch

METER CONTROL SWITCH

Meter control switch

No.	Switch name	Operation	Description
1	Illumination control switch	Press	An illuminance level of the back light of the combination meter can be adjusted.
2	Illumination control switch	Press	The trip meter can be switched between A and B Trip meter A/B can be reset by pressing and holding the trip reset switch. A trip computer value displayed on the information display can be reset by pressing and holding the trip reset switch for 1 second or more. All trip computer values can be reset by pressing and holding the trip reset switch for 3 seconds or more.

System

METER SYSTEM METER SYSTEM : System Description SYSTEM DIAGRAM Combination Meter Input Signal (CAN Communication Signal) DESCRIPTION Combination Meter The combination meter c ...

Diagnosis system (combination meter)

Description COMBINATION METER SELF-DIAGNOSIS MODE The following meter functions can be checked during Combination Meter Self-Diagnosis Mode: Pointer sweep of speedometer, tachometer and ...

Other materials:

P0603, P062F ECM
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0603 ECM BACK UP/CIRCUIT [Internal Control Module Keep Alive Memory (KAM) Error] ECM buck up system does not function properly. P062F ...

Forward-facing child restraint installation using the seat belts
WARNINGThe three-point seat belt with Automatic Locking Retractor (ALR) must be used when installing a child restraint. Failure to use the ALR mode will result in the child restraint not being properly secured. The restraint could tip over or be loose and cause injury to a c ...

Component parts
Component Parts Location ENGINE ROOM COMPARTMENT No. Component Function 1 IPDM E/R IPDM E/R control the internal relays and the actuators. Refer to PCS-5, "RELAY CONTROL SYSTEM : System Description". When CAN comm ...