Nissan Rogue manuals

Nissan Rogue Owners Manual: Operating range

Operating range
Operating range

The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch 1 .

When the Intelligent Key battery is discharged or strong radio waves are present near the operating location, the Intelligent Key operating range becomes narrower, and the Intelligent Key may not function properly.

The operating range is within 31.5 in (80 cm) from each request switch 1 .

If the Intelligent Key is too close to the door glass, handle or rear bumper, the request switches may not function.

When the Intelligent Key is within the operating range, it is possible for anyone, even someone who does not carry the Intelligent Key, to push the request switch to lock/unlock the doors.

NISSAN Intelligent Key® (if so equipped)
WARNING  Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should contact the electric medical equipment manufacturer for the pos ...

Door locks/unlocks precaution
Door locks/unlocks precaution Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the I ...

Other materials:

Symptom diagnosis
INTERIOR LIGHTING SYSTEM SYMPTOMS Symptom Table CAUTION: Perform the self-diagnosis with CONSULT before the symptom diagnosis. Perform the trouble diagnosis if any DTC is detected. Symptom Possible cause Inspection item All the following lamps do not turn ON. ...

DTC/circuit diagnosis
P1610 LOCK MODE Description ECM forcibly switches to the mode that inhibits engine start, when engine start operation is performed 5 times or more while communication between ECM and BCM is not normal. DTC Logic DTC DETECTION LOGIC NOTE:  If DTC B1610 is displayed with DTC U1000, fi ...

P0327, P0328 KS
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0327 KNOCK SEN/CIRC-B1 (Knock sensor 1 circuit low bank 1 or single sensor) An excessively low voltage from the knock sensor is sent to ECM. ...

© 2014-2024 Copyright www.nirogue.com