Nissan Rogue manuals

Nissan Rogue Service Manual: None of the power windows can be operated using any switch

Diagnosis Procedure

1.CHECK BCM POWER SUPPLY AND GROUND CIRCUIT

Check BCM power supply and ground circuit.

Refer to BCS-68, "Diagnosis Procedure" (with Intelligent Key system) or BCS-128, "Diagnosis Procedure" (without Intelligent Key system).

Is the inspection result normal? YES >> GO TO 2.

NO >> Repair or replace the malfunctioning parts.

2.CHECK MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH POWER SUPPLY AND GROUND CIRCUIT

Check main power window and door lock/unlock switch power supply and ground circuit.

Refer to PWC-30, "POWER WINDOW MAIN SWITCH : Diagnosis Procedure".

Is the inspection result normal? YES >> GO TO 3.

NO >> Repair or replace the malfunctioning parts.

3.CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal? YES >> Check intermittent incident. Refer to GI-41, "Intermittent Incident".

NO >> GO TO 1.

Power window control system symptoms
Symptom Table Symptom Reference page None of the power windows can be operated using any switch. Refer to PWC-55, "Diagnosis Procedure". Driver side p ...

Driver side power window does not operate
Diagnosis Procedure 1.CHECK FRONT POWER WINDOW MOTOR LH Check power window motor. Refer to PWC-38, "DRIVER SIDE : Component Function Check". Is the inspection result normal? YES > ...

Other materials:

Warning/indicator lights and audible reminders
Anti-lock Braking System (ABS) warning light Brake warning light Charge warning light Low tire pressure warning light Low windshield washer fluid warning light (if so equipped) Master warning light Power s ...

System limits - Active Cruise Control with Stop&Go function ACC
System limits System limits of the sensors Additional information: Cameras Radar sensors Detection range The detection capability of the system and the automatic braking performance are limited. Two-wheeled vehicles for instance might not be detected. Deceleration The system does not decelerate ...

Fuel pump
Description Sensor Input signal to ECM ECM Function Actuator Crankshaft position sensor (POS) Camshaft position sensor (PHASE) Engine speed* Fuel pump control Fuel pump relay↓ Fuel pump Battery Battery voltage* *: ECM determines the st ...

В© 2014-2022 Copyright www.nirogue.com