Nissan Rogue manuals

Nissan Rogue Service Manual: Noise, vibration and harshness (NVT) troubleshooting

Nissan Rogue Service Manual / Suspension / Road Wheels & Tires / Symptom diagnosis / Noise, vibration and harshness (NVT) troubleshooting

NVH Troubleshooting Chart

Use the chart below to find the cause of the symptom. If necessary, repair or replace these parts.

NVH Troubleshooting Chart

×: Applicable

Easy fill tire alert does not activate
Description The easy fill tire alert does not function while inflating a tire when the select lever position is in P-range with the power switch ON or with the vehicle set to READY. NOTE: &nb ...

Periodic maintenance
...

Other materials:

C1143 steering angle sensor
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1143 ST ANG SEN CIRCUIT When a malfunction is detected in steering angle sensor. Harness or connector  Steering angle sensor  ABS actuator and ...

C1729 vehicle speed signal
DTC Logic NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

General maintenance
During the normal day-to-day operation of the vehicle, general maintenance should be performed regularly as prescribed in this section. If you detect any unusual sounds, vibrations or smells, be sure to check for the cause or have a NISSAN dealer do it promptly. In addition, you should notify ...

© 2014-2022 Copyright www.nirogue.com