Nissan Rogue manuals

Nissan Rogue Owners Manual: NISSAN Intelligent Key® battery discharge (if so equipped)

Nissan Rogue Owners Manual / Starting and driving / Push-Button Ignition Switch (if so equipped) / NISSAN Intelligent Key® battery discharge (if so equipped)

NISSAN Intelligent Key® battery discharge
NISSAN Intelligent Key® battery discharge

If the battery of the NISSAN Intelligent Key® is discharged, or environmental conditions interfere with the Intelligent Key operation, start the engine according to the following procedure:

  1.  Place the shift lever in the P (Park) position.
  2.  Firmly apply the foot brake.
  3.  Touch the ignition switch with the Intelligent Key as illustrated. (A chime will sound.)

After step 3 is performed, when the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change to ON.

  1.  Push the ignition switch while depressing the brake pedal within ten seconds after the chime sounds. The engine will start.

NOTE:

Push-button ignition switch positions
LOCK (Normal parking position): The ignition switch can only be locked in this position. The ignition switch will lock when any door is opened or closed with the ignition switched off. ON (Norm ...

NISSAN vehicle immobilizer system
The NISSAN Vehicle Immobilizer system will not allow the engine to start without the use of the registered key. If the engine fails to start using a registered key (for example, when interferenc ...

Other materials:

Diagnosis system (BCM) (without intelligent key system)
COMMON ITEM COMMON ITEM : CONSULT Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. Direct Diagnostic M Description Ecu Identification The BCM part number is displayed. Self Diagnostic Res ...

Navigation System voice commands
The following voice commands are available for the Navigation System:  Street Address (address)  Points of Interest (name)  POI by Category  Home  Address Book  Previous Destinations  Enter Address in Steps  Cancel Route For additional in ...

ECU diagnosis information
EPS CONTROL UNIT Reference Value VALUES ON THE DIAGNOSIS TOOL CAUTION: The output signal indicates the EPS control unit calculation data. The normal values will be displayed even in the event that the output circuit (harness) is open. NOTE: The following table includes information (items) ...

© 2014-2022 Copyright www.nirogue.com