Nissan Rogue manuals

Nissan Rogue Service Manual: Moonroof switch

Removal and Installation

REMOVAL

  1.  Remove map lamp assembly. Refer to INL-55, "Removal and Installation".
  2.  Using a suitable tool release clip from harness connector.

    : Clip

Removal

  1. Using a suitable tool release pawls and remove moonroof switch finisher (1).
  2. Using a suitable tool release pawls and remove moonroof switch (2) from the front room/map lamp.

    : Pawl

Removal

INSTALLATION

Installation is in the reverse order of removal.

Wind deflector
Removal and Installation REMOVAL  Remove headlining Refer to INT-30, "Removal and Installation".  Open the glass lid to view the wind deflector.  Use suitable tool (A ...

Exterior
...

Other materials:

P0031, P0032 A/F sensor 1 heater
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0031 A/F SEN1 HTR (B1) [Air fuel ratio (A/F) sensor 1 heater (bank 1)control circuit low] The current amperage in the A/F sensor 1 heater circu ...

System description
COMPONENT PARTS Component Parts Location Center of back door No. Component Function 1 Rod antenna Refer to AV-14, "Rod Antenna, Antenna Amp., Satellite Antenna and Antenna  Feeder". 2 Antenna base (antenna amp. and sa ...

Radio
With the ignition placed in the ACC or ON position, press the or POWER button/VOLUME control knob to turn the radio on. If you listen to the radio with the engine not running, the ignition should be placed in the ACC position. Radio reception is affected by station signal strength, distance ...

В© 2014-2024 Copyright www.nirogue.com