Nissan Rogue Service Manual: Manual air conditioning

Removal and installation

A/C SWITCH ASSEMBLY Removal and Installation REMOVAL  Release the A/C switch assembly clips and pawls using a suitable tool. : Metal clip : Pawl  Disconnect the harness con ...

Precaution

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

Other materials:

Diagnosis and repair work flow
Work Flow NOTE: The Signal Tech II Tool [- (J-50190)] can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information.  Activate and display TPMS sensor IDs  Display tire pressure reported by the TPMS sensor  Read TPMS DTC ...

Sunshade system does not operate properly
Diagnosis Procedure 1.CHECK BCM POWER SUPPLY AND GROUND CIRCUIT Check BCM power supply and ground circuit. Refer to BCS-68, "Diagnosis Procedure" (with Intelligent Key System), BCS-128, "Diagnosis Procedure" (without Intelligent Key System). Is the inspection result no ...

Diagnosis system [ABS actuator and electric unit (control unit)]
CONSULT Function APPLICATION ITEMS CONSULT can display each diagnostic item using the diagnostic test modes as follows. Mode Function description ECU identification Parts number of ABS actuator and electric unit (control unit) can be read. Self Diagnos ...