Nissan Rogue Service Manual: Harness

Nissan Rogue Service Manual / Electrical & power control / Power Supply, Ground & Circuit Elements / DTC/circuit diagnosis / Harness

Harness Layout

HOW TO READ HARNESS LAYOUT

The following Harness Layouts use a map style grid to help locate connectors on the drawings:

Main Harness and Main Sub Harness
Engine Room Harness
Engine Room Harness (Passenger Compartment)
Front End Module Harness
Engine Control Harness
Body Harness
Body No. 2 Harness
Room Lamp Harness

To use the grid reference

Find the desired connector number on the connector list.
Find the grid reference.
On the drawing, find the crossing of the grid reference letter column and number row.
Find the connector number in the crossing zone.
Follow the line (if used) to the connector.

How to read harness layout

OUTLINE

Outline

MAIN HARNESS

Main harness

ENGINE ROOM HARNESS

Engine room harness

ENGINE ROOM HARNESS (PASSENGER COMPARTMENT)

Engine room harness (passenger compartment)

FRONT END MODULE HARNESS

Front end module harness

ENGINE CONTROL HARNESS

Engine control harness

BODY HARNESS

Body harness

BODY NO. 2 HARNESS

Body no. 2 Harness

ROOM LAMP HARNESS

Room lamp harness

FRONT DOOR LH HARNESS

Front door lh harness

FRONT DOOR RH HARNESS

Front door rh harness

REAR DOOR LH HARNESS

Rear door lh harness

REAR DOOR RH HARNESS

Rear door rh harness

BACK DOOR HARNESS

Back door harness

Ground

Ground Distribution MAIN HARNESS ENGINE ROOM HARNESS ENGINE CONTROL HARNESS BODY HARNESS BODY NO. 2 HARNESS ...

Electrical units location

Electrical Units Location ENGINE COMPARTMENT PASSENGER COMPARTMENT ...

Other materials:

U110f lost communication (ECM)
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition U110F LOST COMM (ECM) (Lost Communication With ECM) When the ignition switch is ON, TCM is unable to receive the CAN communications signal from ...

Removal and installation
A/C SWITCH ASSEMBLY Removal and Installation REMOVAL Release the A/C switch assembly clips and pawls using a suitable tool. : Metal clip : Pawl Disconnect the harness connector from the A/C switch assembly (1) and remove. INSTALLATION Installation is in the reve ...

Diagnosis system (BCM) (with intelligent key system)
COMMON ITEM COMMON ITEM : CONSULT Function (BCM - COMMON ITEM) APPLICATION ITEM CONSULT performs the following functions via CAN communication with BCM. SYSTEM APPLICATION BCM can perform the following functions. BUZZER BUZZER : CONSULT Function (BCM - BUZZER) DATA MONITOR ACTIV ...