Nissan Rogue Service Manual: Glove box assembly and housing

Nissan Rogue Service Manual / Body interior / Instrument Panel / Removal and installation / Glove box assembly and housing

Removal and Installation

REMOVAL

Release instrument side finisher (RH) (1) pawls using a suitable tool and remove.

: Pawl

NOTE: LH side shown; RH similar.

Removal

Release the glove box damper (1) from the glove box assembly (2) as shown.

Removal

Release the glove box assembly pawls as shown.

: Pawl

Removal

Release the pawls and remove the glove box assembly.
: Pawl

Removal

Remove instrument finisher E. Refer to IP-16, "INSTRUMENT FINISHER E : Removal and Installation".
Remove audio unit (DISPLAY AUDIO). Refer to AV-64, "Removal and Installation"
Remove AV control unit. Refer to AV-209, "Removal and Installation" (NAVIGATION WITHOUT BOSE) or AV-376, "Removal and Installation" (NAVIGATION WITH BOSE).
Remove front air control or A/C switch assembly. Refer to HAC-181, "Removal and Installation" (MANUAL AIR CONDITIONING) or HAC-102, "Removal and Installation" (AUTOMATIC AIR CONDITIONING).
. Remove the glove box housing screws (A).

Removal

Release the clips using a suitable tool, disconnect the harness connector and remove glove box housing.
: Metal clip

Removal

INSTALLATION

Installation is in the reverse order of removal.

Instrument lower panel LH

Removal and Installation REMOVAL Release instrument side finisher (LH) (1) pawls using a suitable tool and remove. : Pawl Remove bolts (A) and fuel filler lid/hood lock release ...

Unit disassembly and assembly

CENTER CONSOLE ASSEMBLY Exploded View Center console cup holder (without heated seats) Coin tray insert Center console cup holder (with heated seats) Front heated ...

Other materials:

ECU diagnosis information
ABS ACTUATOR AND ELECTRIC UNIT (CONTROL UNIT) Reference Value CONSULT DATA MONITOR STANDARD VALUE NOTE: The following table includes information (items) inapplicable to this vehicle. For information (items) applicable to this vehicle, refer to CONSULT display items. Note 1: Confi ...

Blower motor
Exploded View Heating and cooling unit assembly Blower motor Screw Front Removal and Installation REMOVAL Remove glove box assembly. Refer to IP-23, "Removal and Installation". Disconnect the harness connector from the blower motor. Remove ...

Jump starting
To start your engine with a booster battery, the instructions and precautions below must be followed. WARNING If done incorrectly, jump starting can lead to a battery explosion, resulting in severe injury or death. It could also damage your vehicle. Explosive ...