Nissan Rogue Service Manual: Front wiper motor
Removal and Installation
REMOVAL
- Remove the front drive assembly. Refer to WW-66, "Removal and Installation".
- Remove the bolts (A) from the front wiper drive assembly (1) and the front wiper motor (2).
- Separate the wiper motor (1) from the front wiper drive assembly (2) using suitable tool (A).
- Remove the front wiper drive assembly.
INSTALLATION
Installation is in the reverse order of removal.
Front wiper drive assembly
Exploded View
REMOVAL
Cowl top
Front wiper drive assembly
Removal and Installation
REMOVAL
Remove cowl top cover. Refer to EXT-25, "Removal and
Installation".
...
Wiper and washer switch
Removal and Installation
The wiper and washer switch is serviced as a part of the combination switch.
Refer to BCS-76, "Removal and
Installation". ...
Other materials:
Front wiper and washer system
Wiring Diagram
...
Water hose
Exploded View
Water outlet
Hose clamp
Water hose A
Clip
CVT oil warmer
Transaxle assembly
Water hose B
Heater thermostat
Water hose C
: Always replace after every
disassembly.
: N·m (kg-m, ft-lb)
Removal and Installation
REMOVAL
WARNING:
Do not remove the rad ...
System description
COMPONENT PARTS
Component Parts Location
No.
Component
Function
1
Combination meter
Combination meter transmits the vehicle speed signal to BCM via CAN
communication.
BCM also receives the vehicle speed signal from ABS actuator and
electric
...
