Nissan Rogue Owners Manual: Exterior and interior lights
| Item | Wattage (W) | Bulb No. | |
| Headlight assembly* | |||
| High | 65 | H9 | |
| Low | 55 | H11 | |
| Park | 5 | W5W | |
| Turn | 28/8 | 7444 | |
| Sidemarker | 5 | WY5W | |
| Front fog lights (if so equipped) | 55 | H11 | |
| Daytime running lights | — | — | |
| Map light (if so equipped)* | — | — | |
| Personal lights | 8 | P1Y | |
| Courtesy light* | — | — | |
| Vanity mirror light | 1.8 | AL1X | |
| Cargo light | — | — | |
| High-mounted stop light* | — | — | |
| Rear combination light | |||
| Tail/Stop* | 5/21 | 7443 | |
| Turn | 21 | WY21W | |
| Rear sidemarker | 5 | W5W | |
| Backup (reversing)* | 16 | W16W | |
| License plate light* | 5 | W5W | |
* See a NISSAN dealer for replacement. Always check with the Parts Department at a NISSAN dealer for the latest parts information.
- Headlight assembly
- Map light (if so equipped)
- Personal light
- Daytime running light
- Fog light (if so equipped)
- Cargo light
- Courtesy light
- High mounted stoplight
- License plate light
- Rear combination light
Replacement procedures
All other lights are either type A, B, C or D. When replacing a bulb, first remove the lens, lamp and/or cover.
Indicates bulb removal
Indicates bulb installation
Personal lights (if so equipped)
Use a cloth and a suitable tool 1 to protect the housing.
Vanity mirror
Use a cloth 1 and suitable tool to protect the housing.
Cargo light
Use a cloth 1 to protect the housing.
Lights
Headlights
Replacing the halogen headlight bulb
(if so equipped)
The headlight is a semi-sealed beam type which
uses a replaceable headlight (halogen) bulb. Because
the headlight assembly must be ...
Wheels and tires
If you have a flat tire, refer to “Flat tire” in
the “In case of emergency” section of this
manual for additional information. ...
Other materials:
System description
STRUCTURE AND OPERATION
Sectional View
Drive gear
Side bearing
Differential case
Pinion mate shaft
Side gear
Pinion mate gear
Drive pinion
Collapsible spacer
AWD solenoid
Stud bolt
Electric controlled coupling
Pinion front bearing
Pinion rear bearing
Elect ...
P0127 IAT sensor
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condition
P0127
IAT SENSOR-B1
(Intake air temperature too high)
Rationally incorrect voltage from the sensor is sent to ECM,
compared with
the voltage ...
Ambient sensor signal circuit
Description
It detects outside air temperature and converts it into a resistance value
which is then input into the combination
meter.
Diagnosis Procedure
Regarding Wiring Diagram information, refer to MWI-32, "Wiring Diagram".
1.CHECK AMBIENT SENSOR SIGNAL CIRCUIT
Turn ig ...
