Nissan Rogue manuals

Nissan Rogue Owners Manual: Event Data Recorders (EDR)

This vehicle is equipped with an Event Data Recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as:

These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a nontrivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g. name, gender, age and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.

To read data recorded by an EDR, special equipment is required and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer and NISSAN dealer, other parties, such as law enforcement, that have the special equipment, can read the information if they have access to the vehicle or the EDR. EDR data will only be accessed with the consent of the vehicle owner or lessee or as otherwise required or permitted by law.

Readiness for inspection/maintenance (I/M) test
WARNINGA vehicle equipped with All -Wheel Drive (AWD) should never be tested using a two wheel dynamometer (such as the dynamometers used by some states for emissions testing), or s ...

Owner’s Manual/Service Manual order information
Genuine NISSAN Service Manuals for this model year and prior can be purchased. A genuine NISSAN Service Manual is the best source of service and repair information for your vehicle. This manual ...

Other materials:

Fuel level sensor signal circuit
Component Function Check 1.COMBINATION METER INPUT SIGNAL  Select "METER/M&A" on "CONSULT".  Using "FUEL METER" of "Data Monitor", compare the value of "Data Monitor" with fuel gauge pointer of combination meter. Does ...

Ignition coil
Exploded View Ignition coil  Spark plug Rocker cover Removal and Installation REMOVAL  Remove air duct assembly. Refer to EM-24, "Exploded View" .  Disconnect the harness connector from the ignition coil.  Remove the ignition coil. CAUTION: ...

C1142 press sensor
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1142 PRESS SEN CIRCUIT When a malfunction is detected in master cylinder pressure sensor Stop lamp switch system  ABS actuator and electric unit ...

© 2014-2025 Copyright www.nirogue.com