Nissan Rogue Service Manual: EVAP control system pressure sensor
Exploded View
- EVAP control system pressure sensor
- O-ring
- EVAP canister
- EVAP canister vent control valve
- EVAP canister vent control valve hose
- EVAP vent line
- EVAP canister purge hose
- Clamp
Front
Removal and Installation
NOTE: The EVAP canister system pressure sensor can be removed without removing the EVAP canister.
REMOVAL
- Disconnect EVAP canister purge hose from EVAP canister.
- Disconnect EVAP control system pressure sensor.
- Remove EVAP control system pressure sensor and O-ring.
INSTALLATION
Installation is in the reverse order of removal.
CAUTION: Do not reuse O-ring.
EVAP canister vent control valve
Exploded View
EVAP control system pressure sensor
O-ring
EVAP canister
EVAP canister vent control valve
EVAP canister vent control valve hose
EVAP vent line
EVAP canister pu ...
EVAP canister filter
Exploded View
EVAP canister vent control valve hose
Canister drain hose
Plug
EVAP canister filter
Front
Removal and Installation
REMOVAL
Disconnect EVAP canister ...
Other materials:
Moonroof unit assembly
Inspection
WIND DEFLECTOR
Open glass lid fully.
Visually check for proper installation, damaged/deteriorated components,
or foreign objects within mechanism.
Correct as required for smooth operation.
Check for grease at the wind deflector arm (1) and pivot areas. If
necessary, apply ...
NISSAN vehicle immobilizer system
The NISSAN Vehicle Immobilizer system will not
allow the engine to start without the use of the
registered key.
If the engine fails to start using a registered key
(for example, when interference is caused by
another registered key, an automated toll road
device or automatic payment device o ...
Wiring diagram
MANUAL AIR CONDITIONING SYSTEM
Wiring Diagram
...
