Nissan Rogue manuals

Nissan Rogue Service Manual: ECU diagnosis information

IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM)

Reference Value

VALUES ON THE DIAGNOSIS TOOL

Values on the diagnosis tool

Values on the diagnosis tool

Values on the diagnosis tool

Values on the diagnosis tool

TERMINAL LAYOUT

Terminal layout

PHYSICAL VALUES

Physical values

Physical values

Physical values

Physical values

1: With Intelligent Key system
2: With remote keyless entry

Fail-safe

CAN COMMUNICATION CONTROL

When CAN communication with ECM and BCM is impossible, IPDM E/R performs fail-safe control. After CAN communication recovers normally, it also returns to normal control.

If No CAN Communication Is Available With ECM

If No CAN Communication Is Available With ECM

If No CAN Communication Is Available With BCM

If No CAN Communication Is Available With BCM

IGNITION RELAY MALFUNCTION DETECTION FUNCTION

Ignition relay malfunction detection function

FRONT WIPER CONTROL

IPDM E/R detects front wiper stop position by a front wiper auto stop signal.

When a front wiper auto stop signal is in the conditions listed below, IPDM E/R stops power supply to wiper after repeating a front wiper 10 second activation and 20 second stop five times.

Front wiper control

NOTE: This operation status can be confirmed on the IPDM E/R “Data Monitor” that displays “BLOCK” for the item “WIP PROT” while the wiper is stopped.

STARTER MOTOR PROTECTION FUNCTION

IPDM E/R turns OFF the starter relay to protect the starter motor when the starter relay remains active for 90 seconds.

DTC Index

DTC Index

DTC Index

DTC Index

NOTE: The details of TIME display are as follows.

System description
COMPONENT PARTS Component Parts Location IPDM E/R  Engine compartment (LH) SYSTEM RELAY CONTROL SYSTEM RELAY CONTROL SYSTEM : System Description SYSTEM DIAGRAM DESCRIPTION ...

Wiring diagram
IPDM E/R (INTELLIGENT POWER DISTRIBUTION MODULE ENGINE ROOM) Wiring Diagram ...

Other materials:

P0744 torque converter
DTC Description DTC DETECTION LOGIC DTC CONSULT screen terms (Trouble diagnosis content) DTC detection condition P0744 TORQUE CONVERTER (Torque converter clutch circuit intermittent) When all of the following conditions are satisfied and this state is maintain ...

Reducing fuel consumption
General information The vehicle contains advanced technologies for the reduction of consumption and emission values. The fuel consumption depends on various factors, such as driving style, road conditions, maintenance or environmental factors. Carrying out certain measures, such as a moderate driv ...

Preparation
Special Service Tool The actual shape of the tools may differ from those illustrated here. Tool number (TechMate No.) Tool name Description ST35652000 ( — ) Strut attachment Disassembling and assembling strut – (J-44372) Pull Gauge ...

© 2014-2022 Copyright www.nirogue.com