Nissan Rogue Service Manual: DTC/circuit diagnosis
- C1704, C1705, C1706, C1707 low tire pressure
- C1708, C1709, C1710, C1711 transmitter (no data)
- C1716, C1717, C1718, C1719 transmitter (pressure data)
- C1729 vehicle speed signal
- C1730, C1731, C1732, C1733 flat tire
- C1734 BCM
- C1735 ignition signal
- C1765, C1766, C1767, C1768 tire pressure sensor
- C1769 configuration setting
- C1770, C1771, C1772, C1773 G sensor
- U1000 CAN COMM CIRCUIT
- U1010 control unit (CAN)
- Low tire pressure warning lamp
- Power supply and ground circuit
Description
This procedure must be performed after replacement of a tire pressure sensor
or BCM.
Work Procedure
TPMS ID registration can be performed using one of the following procedures:
&n ...
DTC Logic
NOTE:
The Signal Tech II Tool [- (J-50190)] can be used to perform the following
functions. Refer to the Signal Tech II
User Guide for additional information.
Activate and dis ...
Other materials:
B0001, B0002 driver airbag module
DTC Logic
DTC DETECTION LOGIC
CONSULT name
DTC
DTC detecting condition
Repair order
DRIVER AIRBAG MODULE CIRCUIT
[OPEN]
B0001
Driver air bag module circuit
(DR1) is open
(including the spiral cable).
Refer to SRC-47, "Diagnosis Proced ...
NISSAN Vehicle Immobilizer System keys
You can only drive your vehicle using the master
keys which are registered to the NISSAN Vehicle
Immobilizer System components in your vehicle.
These keys have a transponder chip in the key
head.
The master key can be used for all the locks.
Never leave these keys in the vehicle.
Additi ...
Wiring diagram
BRAKE CONTROL SYSTEM
Wiring Diagram
...
В© 2014-2024 Copyright www.nirogue.com