Nissan Rogue manuals

Nissan Rogue Service Manual: DTC/circuit diagnosis

SPORT MODE SWITCH

Component Function Check

1. CHECK SPORT MODE SWITCH OPERATION

  1.  Turn ignition switch ON.
  2.  Check SPORT mode indicator lamp turns ON/OFF on combination meter when turn SPORT mode switch ON/OFF.

Is the inspection result normal? YES >> INSPECTION END

NO >> Proceed to DMS-13, "Diagnosis Procedure".

Diagnosis Procedure

1.CHECK SPORT MODE SWITCH CIRCUIT

  1.  Turn ignition switch OFF.
  2.  Disconnect SPORT mode switch harness connector.
  3.  Turn ignition switch ON.
  4.  Check voltage between SPORT mode switch harness connector terminals.

Check sport mode switch circuit

Is the inspection result normal? YES >> GO TO 6.

NO >> GO TO 2.

2.CHECK GROUND CIRCUIT

  1.  Turn ignition switch OFF.
  2.  Check the continuity between SPORT mode switch harness connector and ground.

Check ground circuit

Is the inspection result normal? YES >> GO TO 3.

NO >> Repair or replace damaged parts.

3.CHECK CIRCUIT BETWEEN COMBINATION METER AND SPORT MODE SWITCH (1)

  1.  Disconnect combination meter harness connector M76.
  2.  Check continuity between combination meter harness connector terminal and SPORT mode switch harness connector terminal.

Check circuit between combination meter and sport mode switch (1)

Is the inspection result normal? YES >> GO TO 4.

NO >> Repair or replace damaged parts.

4.CHECK CIRCUIT BETWEEN COMBINATION METER AND SPORT MODE SWITCH (2)

Check continuity between combination meter harness connector terminal and SPORT mode switch harness connector terminal.

Check circuit between combination meter and sport mode switch (2)

Is the inspection result normal? YES >> GO TO 5.

NO >> Repair or replace damaged parts.

5.CHECK COMBINATION METER INPUT/OUTPUT SIGNAL

  1.  Connect all of disconnected connectors.
  2.  Check input/output signal of combination meter. Refer to MWI-24, "Reference Value".

Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-41, "Intermittent Incident".

NO >> Replace combination meter. Refer to MWI-82, "Removal and Installation".

6.CHECK SPORT MODE SWITCH

Check SPORT mode switch. Refer to DMS-14, "Component Inspection".

Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-41, "Intermittent Incident".

NO >> Replace SPORT mode switch. Refer to DMS-16, "Removal and Installation".

Component Inspection

1.CHECK SPORT MODE SWITCH

Check continuity between SPORT mode switch connector terminals.

Check sport mode switch

Is the inspection result normal? YES >> INSPECTION END

NO >> Replace SPORT mode switch. Refer to DMS-16, "Removal and Installation".

Basic inspection
DIAGNOSIS AND REPAIR WORK FLOW Work Flow DETAILED FLOW 1.OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much information as possible about the conditions and environment un ...

Symptom diagnosis
THE SPORT MODE INDICATOR LAMP DOES NOT TURN ON Description The SPORT mode indicator lamp does not turn ON when the SPORT mode switch is operated. Diagnosis Procedure 1.CHECK SPORT MODE INDICATOR ...

Other materials:

Booster seats
Precautions on booster seats WARNINGIf a booster seat and seat belt are not used properly, the risk of a child being injured in a sudden stop or collision greatly increases:  Make sure the shoulder portion of the belt is away from the child’s face and neck and ...

Rear RH side power window does not operate
WITH BOTH POWER WINDOW MAIN SWITCH AND REAR POWER WINDOW SWITCH RH WITH BOTH POWER WINDOW MAIN SWITCH AND REAR POWER WINDOW SWITCH RH : Diagnosis Procedure 1.CHECK REAR POWER WINDOW SWITCH Check rear power window switch. Refer to PWC-36, "Component Function Check". Is the inspec ...

Operating range
Operating range The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range. When the Intelligent Key battery is almost discharged or strong radio waves are present near the operating location, the Intelligent Key system’s operating ...

© 2014-2024 Copyright www.nirogue.com