Nissan Rogue Service Manual: Door mirror remote control switch
Removal and Installation
REMOVAL
- Release pawls using a suitable tool and remove front door pull handle (LH). Refer to INT-15, "Exploded View".
- Release pawls (B) using a suitable tool and remove door mirror remote control switch (1).
- Remove screws (A) and door mirror remote control switch bracket (2) (if necessary).
INSTALLATION
Installation is in the reverse order of removal.
Side camera finisher
Removal and Installation
The side camera finisher (if equipped) or door mirror lower finisher is
serviced as part of the door mirror rear
finisher. Refer to MIR-25, "Removal and Installation& ...
Other materials:
Removal and installation
AWD CONTROL UNIT
Exploded View
1 AWD control unit
: Vehicle front
: N·m (kg-m, in-lb)
Removal and Installation
REMOVAL
Remove luggage side lower finisher (LH). Refer to INT-33,
"Exploded View".
Disconnect AWD control unit harness connector.
Remove AWD ...
B00A0 OCS system
Description
DTC B1017, B1018, B1020, B1021, B1022, B1025, B1032, B1048 OCCUPANT
CLASSIFICATION
SYSTEM (OCS)
The OCS control unit is wired to the air bag diagnosis sensor unit. The air
bag diagnosis sensor unit will monitor
the OCS for failures and interruptions in communication between the O ...
Mixture ratio self-learning value clear
Description
This describes how to erase the mixture ratio self-learning value. For the
actual procedure, follow the instructions
in “Diagnosis Procedure”.
Work Procedure
1.START
With CONSULT
Start engine and warm it up to normal operating temperature.
Select “SELF-LEA ...
