Nissan Rogue manuals

Nissan Rogue Owners Manual: Daytime running light system

The daytime running lights automatically illuminate when the engine is started with the parking brake released. The daytime running lights operate with the headlight switch in the OFF position or in the position. Turn the headlight switch to the position for full illumination when driving at night.

If the parking brake is applied before the engine is started, the daytime running lights do not illuminate.

The daytime running lights illuminate when the parking brake is released. The daytime running lights will remain on until the ignition switch is placed in the OFF position.

WARNING

When the daytime running light system is active, tail lights on your vehicle are not on. It is necessary at dusk to turn on your headlights. Failure to do so could cause an accident injuring yourself and others.

Headlight control switch
Type A (if so equipped) When turning the switch to the position, the front parking, tail, license plate and instrument panel lights come on. When turning the switch to the position ...

Instrument brightness control
Instrument brightness control Push the “-” button A to decrease the brightness of instrument panel lights when driving at night. Push the “+” button B to increase the brightness of ...

Other materials:

Basic inspection
DIAGNOSIS AND REPAIR WORKFLOW Work Flow OVERALL SEQUENCE DETAILED FLOW 1.GET INFORMATION FOR SYMPTOM Get detailed information from the customer about the symptom (the condition and the environment when the incident/malfunction occurred). >> GO TO 2. 2.CONFIRM THE SYMPTOM Try t ...

C1144 incomplete steering angle sensor adjustment
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1144 ST ANG SEN SIGNAL When neutral position adjustment of steering angle sensor is not complete. Harness or connector  Steering angle sensor &n ...

P2100, P2103 throttle control motor relay
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P2100 ETC MOT PWR-B1 (Throttle actuator ″A″ control motor circuit/ open) ECM detects a voltage of power source for throttle control ...

© 2014-2024 Copyright www.nirogue.com