Nissan Rogue manuals

Nissan Rogue Service Manual: CVT oil warmer

Exploded View

Exploded view

  1. Transaxle assembly
  2. CVT oil warmer

: N·m (kg-m, in-lb)

Removal and Installation

REMOVAL

WARNING: Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure engine coolant escaping from the radiator. Wrap a thick cloth around the cap. Slowly turn it a quarter turn to allow built-up pressure to escape. Carefully remove the cap by turning it all the way.

CAUTION: Perform when the engine is cold.

  1.  Remove front under cover. Refer to EXT-16, "Exploded View".
  2.  Remove engine under cover. Refer to EXT-37, "ENGINE UNDER COVER : Removal and Installation".
  3.  Remove fender protector side cover. Refer to EXT-28, "FENDER PROTECTOR : Exploded View".
  4.  Disconnect water hoses from CVT oil warmer. Refer to TM-212, "Exploded View".
  5.  Disconnect fluid cooler hoses from CVT oil warmer. Refer to TM-215, "Exploded View".
  6.  Remove CVT oil warmer bolts ( ) and remove CVT oil warmer (1) from transaxle assembly.

Removal

INSTALLATION

Installation is in the reverse order of removal.

Inspection

INSPECTION AFTER INSTALLATION

Fluid cooler hose
Exploded View COMPONENT PARTS LOCATION Transaxle assembly Fluid cooler hose A Hose clamp Fluid cooler hose B CVT oil warmer To radiator : Always replace after every disassem ...

Plug
Description Replace the O-ring if oil leakage or exudes from the plug. Exploded View Transaxle assembly O-ring Plug : Always replace after every disassembly. : N·m (kg-m, ft-lb) ...

Other materials:

Front power window switch (passenger side)
Description Front power window motor RH will be operated if front power window switch RH is operated. Component Function Check 1. CHECK FRONT POWER WINDOW SWITCH RH FUNCTION Check front power window motor RH operation with front power window switch RH. Is the inspection result normal? YES ...

Wiring diagram
CHASSIS CONTROL Wiring Diagram ...

Combination meter
Removal and Installation REMOVAL  Disconnect the negative battery terminal. Refer to PG-77, "Removal and Installation".  Remove the cluster lid A. Refer to IP-20, "Removal and Installation".  Remove screws (A), from the combination meter (1). ...

© 2014-2024 Copyright www.nirogue.com