Component Parts Location
Component Description
Component |
Description |
Compressor | Intakes, compresses and discharges refrigerant to circulate refrigerant inside the refrigerant system. |
Condenser | Cools refrigerant discharged from compressor and transforms it to liquid refrigerant. |
Liquid tank | Eliminates foreign matter in refrigerant and stores temporarily liquid refrigerant. |
Refrigerant pressure sensor | Refer to EC-482, "Component Function Check". |
Expansion valve | Transforms high-pressure liquid refrigerant to mist form low-pressure liquid refrigerant. |
Evaporator | The mist form liquid refrigerant transforms to gas by evaporation by the air conveyed from blower motor. The air is cooled by the heat by evaporation. |
P0078 EVT control solenoid valve
DTC Description
DTC DETECTION LOGIC
DTC No.
CONSULT screen terms
(Trouble diagnosis content)
DTC detecting condit
P0078
EX V/T ACT/CIRC-B1
(Exhaust valve control solenoid circuit bank
1)
An improper voltage is sent to the ECM through exhaust valve timing
co ...
Unexpected brake pedal reaction
Description
A malfunction of brake pedal feel (height or others) is detected when brake
pedal is depressed.
Diagnosis Procedure
1.CHECK FRONT AND REAR AXLE
Check that there is no excessive looseness in front and rear axle.
2WD: Refer to FAX-7, "Inspection" (front) or RAX-6, ...
Harness connector
Description
HARNESS CONNECTOR (TAB-LOCKING TYPE)
The tab-locking type connectors help prevent accidental looseness
or disconnection.
The tab-locking type connectors are disconnected by pushing or
lifting the locking tab(s). Refer to the figure
below.
Refer to the next p ...