Nissan Rogue Service Manual: Component parts

Nissan Rogue Service Manual / Driver controls / Interior Lighting System / System description / Component parts

Component Parts Location

Component Parts Location

Rear luggage area (RH)
Front headliner area
Engine compartment (LH)
Left side of instrument panel (view with finish panel removed)
Instrument panel (LH)

No.	Part	Description
1	Back door lock assembly (back door switch)	Refer to DLK-21, "Back Door Lock Assembly".
2	Personal lamps 2nd row	Refer to INL-63, "Bulb Specifications".
3	Front door request switch (RH)	Refer to DLK-24, "Front Door Request Switch (RH)".
4	Optical sensor	Refer to EXL-10, "Optical Sensor".
5	Front door request switch (LH)	Refer to DLK-24, "Front Door Request Switch (LH)".
6	Luggage room lamp	Refer to INL-63, "Bulb Specifications".
7	Room lamp	Refer to INL-63, "Bulb Specifications".
8	Vanity mirror lamps	Refer to INL-63, "Bulb Specifications".
9	Map lamp assembly	Refer to INL-63, "Bulb Specifications".
10	IPDM E/R	Controls audio unit and AV control unit illumination supply voltage according to the request signal from BCM (via CAN communication). Refer to PCS-4, "Component Parts Location" for detailed installation location.
11	BCM	Activates the interior room lamp timer depending on the vehicle condition to turn the interior room lamps ON/OFF. Operates the interior room lamp battery saver depending on the vehicle condition to cut the interior room lamp power supply. Detects each switch condition by the combination switch reading function. Judges the illumination lamp ON/OFF status depending on the vehicle condition. And then it transmits position light request signal to IPDM E/R and combination meter (with CAN communication). Controls the room lamp relay according to the request signal from BCM (via CAN communication). Refer to BCS-7, "BODY CONTROL SYSTEM : Component Parts Location" (with Intelligent Key system) or BCS-79, "BODY CONTROL SYSTEM : Component Parts Location" (without Intelligent Key system) for detailed installation location.

System

INTERIOR ROOM LAMP CONTROL SYSTEM INTERIOR ROOM LAMP CONTROL SYSTEM : System Description SYSTEM DIAGRAM OUTLINE Interior room lamps* are controlled by interior room lamp timer control ...

Other materials:

C1604 torque sensor
DTC Logic DTC DETECTION LOGIC DTC Display item Malfunction detected condition Possible cause C1604 TORQUE SENSOR When torque sensor output signal is malfunctioning. Harness or connector Torque sensor EPS control unit ...

Diagnosis and repair workflow
Work Flow OVERALL SEQUENCE DETAILED FLOW 1. OBTAIN INFORMATION ABOUT SYMPTOM Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred. >> GO TO 2. 2. CONFIRM CONCERN Check the malfunction on the veh ...

P0444, P0445 EVAP canister purge volume control solenoid
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0444 PURG VOLUME CONT/V (Evaporative emission system purge control valve circuit open) An excessively low voltage signal is sent to ECM through ...