Nissan Rogue manuals

Nissan Rogue Service Manual: Basic inspection

DIAGNOSIS AND REPAIR WORKFLOW

Workflow

OVERALL SEQUENCE

Overall sequence

DETAILED FLOW

1.INTERVIEW CUSTOMER

Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.

>> GO TO 2.

2.SYMPTOM CHECK

Verify symptoms.

>> GO TO 3.

3.CHECK FOR DTCS

With CONSULT

  1.  Turn ignition switch ON.
  2.  Select “Self Diagnostic Result” mode of “HVAC” using CONSULT.
  3. Check DTC.

Is any DTC detected? YES >> GO TO 4.

NO >> GO TO 5.

4.PERFORM DTC DIAGNOSTIC PROCEDURE

Perform the diagnostic procedure for the detected DTC. Refer to HAC-32, "DTC Inspection Priority Chart" (automatic A/C) or HAC-134, "DTC Inspection Priority Chart" (manual A/C).

>> GO TO 7.

5.OPERATION CHECK

Perform the operation check. Refer to HAC-48, "Work Procedure" (automatic A/C) or HAC-148, "Work Procedure" (manual A/C).

>> GO TO 6.

6.SYMPTOM DIAGNOSIS

Check the symptom diagnosis table. Refer to HAC-96, "Diagnosis Chart By Symptom" (automatic A/C) or HAC-174, "Symptom Table" (manual A/C).

>> GO TO 8.

7.VERIFY REPAIR.

With CONSULT

  1.  Turn ignition switch ON.
  2.  Select “Self Diagnostic Result” mode of “HVAC” using CONSULT.
  3.  Check DTC.

Is any DTC detected? YES >> GO TO 4.

NO >> GO TO 8.

8.PERFORM FINAL OPERATION CHECK

Perform the operation check. Refer to HAC-48, "Work Procedure" (automatic A/C) or HAC-148, "Work Procedure" (manual A/C).

Does it operate normally? YES >> Inspection End.

NO >> GO TO 2.

System
System Diagram Compressor Pressure relief valve Liquid tank Refrigerant pressure sensor Condenser Expansion valve Evaporator Blower motor  High-pressure gas &n ...

Symptom diagnosis
...

Other materials:

Removal and installation
BCM (BODY CONTROL MODULE) Removal and Installation CAUTION: Before replacing the BCM, perform “READ CONFIGURATION” to save or print current vehicle specification. Refer to BCS-120, "ADDITIONAL SERVICE WHEN REPLACING CONTROL UNIT (BCM) : Work Procedure". REMOVAL  Disc ...

Oil cooler
Exploded View  Intake manifold Cylinder block  Clamp  Water hose Water hose clip  Water hose  Oil cooler  Gasket  Oil cooler relief valve Front Removal and Installation WARNING: Be careful not to burn yourself, as engine oil and ...

Component parts
Component Parts Location A/C switch (auto A/C) Front air control (manual A/C) No. Component Description 1 Rear window defogger connector (Rear window defogger) Refer to DEF-5, "Rear window defogger". 2 3 Rear win ...

© 2014-2024 Copyright www.nirogue.com