Nissan Rogue manuals

Nissan Rogue Service Manual: Basic inspection

DIAGNOSIS AND REPAIR WORKFLOW

Trouble Diagnosis Flow Chart

Trouble Diagnosis Flow Chart

Trouble Diagnosis Procedure

INTERVIEW WITH CUSTOMER

Interview with the customer is important to detect the root cause of CAN communication system errors and to understand vehicle condition and symptoms for proper trouble diagnosis.

Points in interview

NOTE:

 

INSPECTION OF VEHICLE CONDITION

Check whether the symptom is reproduced or not.

NOTE: Do not turn the ignition switch OFF or disconnect the battery cable while reproducing the error. The error may temporarily correct itself, making it difficult to determine the root cause.

CHECK OF CAN SYSTEM TYPE (HOW TO USE CAN SYSTEM TYPE SPECIFICATION CHART)

Determine CAN system type based on vehicle equipment.

NOTE:

CAN System Type Specification Chart (Style A)

NOTE: CAN system type is easily checked with the vehicle equipment identification information shown in the chart.

CAN System Type Specification Chart (Style A)

CAN System Type Specification Chart (Style B)

NOTE: CAN system type is easily checked with the vehicle equipment identification information shown in the chart.

CAN System Type Specification Chart (Style B)

CREATE INTERVIEW SHEET

Fill out the symptom described by the customer, vehicle condition, and CAN system type on the interview sheet.

Interview Sheet (Example)

Interview Sheet (Example)

DETECT THE ROOT CAUSE

CAN diagnosis function of CONSULT detects the root cause.

System description
CAN COMMUNICATION SYSTEM System Description CAN communication is a multiplex communication system. This enables the system to transmit and receive large quantities of data at high speed by c ...

CAN
...

Other materials:

Parking brake control
Exploded View Parking brake rear cable (RH) Parking brake rear cable (LH) Parking brake front cable  Parking brake control Adjusting nut Parking brake switch Removal and Installation REMOVAL  Remove instrument lower panel LH. Refer to IP-22, "Removal and ...

C1604 torque sensor
DTC Logic DTC DETECTION LOGIC DTC Display item Malfunction detected condition Possible cause C1604 TORQUE SENSOR When torque sensor output signal is malfunctioning. Harness or connector  Torque sensor  EPS control unit ...

Drive belts
Exploded view  Generator pulley Water pump pulley Drive belt auto-tensioner  Crankshaft pulley A/C compressor pulley Drive belt retainer boss  View A  New drive belt range Possible use range Indicator (notch) Checking WARNING: Inspect the ...

© 2014-2022 Copyright www.nirogue.com