Nissan Rogue Owners Manual: Audio system
- Radio
- FM radio reception
- AM radio reception
- Satellite radio reception (if so equipped)
- Audio operation precautions
- FM/AM radio with compact disc (CD) player (if so equipped)
- FM/AM/SAT radio with compact disc (CD) player (Type A) (if so equipped)
- FM/AM/SAT radio with compact disc (CD) player (Type B) (if so equipped)
- USB (Universal Serial Bus) Connection Port (models without Navigation System) (if so equipped)
- USB (Universal Serial Bus) Connection Port (models with Navigation System) (if so equipped)
- iPod®* player operation without Navigation System (if so equipped)
- iPod®* player operation with Navigation System (if so equipped)
- Bluetooth® streaming audio without Navigation System (if so equipped)
- Bluetooth® streaming audio with Navigation System
- CD care and cleaning
- Steering wheel switch for audio control
Servicing air conditioner
The air conditioner system in your NISSAN vehicle
is charged with a refrigerant designed with
the environment in mind.
This refrigerant does not harm the earth’s
ozone layer.
Special charging ...
Radio
With the ignition placed in the ACC or ON position,
press the or POWER
button/VOLUME control knob to turn the radio
on. If you listen to the radio with the engine not
running, the ignition should ...
Other materials:
Securing the load
Cargo area luggage hooks
There are luggage hooks located in the cargo
area as shown. The hooks can be used to secure
cargo with ropes or other types of straps.
Do not apply a total load of more than
6.5 lbs. (29 N) to a single metal floor hook
when securing cargo.
WARNING
&nb ...
Diagnosis system (TCM)
DIAGNOSIS DESCRIPTION
DIAGNOSIS DESCRIPTION : 1 Trip Detection Diagnosis and 2 Trip Detection
Diagnosis
NOTE:
“Start the engine and turn OFF the ignition switch after warm-up.” This is
defined as 1 trip.
1 TRIP DETECTION DIAGNOSIS
When initial malfunction is detected, TCM memorizes DTC. ...
Power supply and ground circuit
WITH INTELLIGENT KEY SYSTEM
WITH INTELLIGENT KEY SYSTEM : Diagnosis Procedure
Regarding Wiring Diagram information, refer to BCS-50, "Wiring Diagram".
1. CHECK FUSE
Check that the following fuse is not blown.
Terminal No.
Signal name
Fuse No.
161
BCM power sup ...
