Nissan Rogue manuals

Nissan Rogue Owners Manual: Air conditioner operation

Start the engine, turn the fan control dial to the desired position, and press the button to activate the air conditioner. When the air conditioner is on, cooling and dehumidifying functions are added to the heater operation.

The air conditioner cooling function operates only when the engine is running.

Cooling

This mode is used to cool and dehumidify the air.

  1.  Press the air flow control button.
  2.  Turn the fan control dial to the desired position.
  3.  Push the button. The indicator light on the button will come on.
  4.  Turn the temperature control dial to the desired position.

Dehumidified heating

This mode is used to heat and dehumidify the air.

  1.  Press the button to the OFF position.
  2.  Press the air flow control button.
  3.  Turn the fan control dial to the desired position.
  4.  Push the button.
  5.  Turn the temperature control dial to the desired position.

Dehumidified defogging

This mode is used to defog the windows and dehumidify the air.

  1.  Press the air flow control button.
  2.  Turn the fan control dial to the desired position.
  1.  Turn the temperature control dial to the desired position.

Operating tips

Heater operation
Heating This mode is used to direct heated air to the foot outlets. Some air also flows from the defrost outlets and the side vent outlets.  Press the button to change to fresh air i ...

Air flow charts
The following charts show the button and dial positions for MAXIMUM AND QUICK heating, cooling or defrosting. The air recirculation indicator should always be in the OFF position for heating and d ...

Other materials:

Front wiper motor lo circuit
Component Function Check 1.CHECK FRONT WIPER LO OPERATION CONSULT ACTIVE TEST  Select FR WIPER of BCM (WIPER) active test item.  Check front wiper operation. LO : Front wiper (LO) operation OFF : Front wiper OFF Is the inspection result normal? YES >> Front wiper motor ...

P0075 intake valve timing control
DTC Description DTC DETECTION LOGIC DTC No. CONSULT screen terms (Trouble diagnosis content) DTC detecting condition P0075 INT/V TIM V/CIR-B1 (Intake valve control solenoid circuit bank 1) ECM detects an abnormal voltage in the intake valve timing co ...

Additional service when replacing transaxle assembly
Description Perform the following work after the transaxle assembly is replaced. WRITING TCM DATA  TCM performs accurate control by retrieving data (inherent characteristic value) of each solenoid. For this reason, after replacing transaxle assembly, it is necessary to write new d ...

© 2014-2024 Copyright www.nirogue.com