Nissan Rogue manuals

Nissan Rogue Owners Manual: Adjusting the screen

Adjusting the screen

The procedure for adjusting the quality of the screen differs depending on the type of screen present on the vehicle.

For vehicles without Navigation System:

  1.  Press the ENTER/SETTING or ENTER/AUDIO button.
  2.  Turn the TUNE/SCROLL or TUNE/FOLDER knob to highlight the “Brightness” or “Contrast” key.
  3.  Press the ENTER/SETTING or ENTER/AUDIO button.
  4. Adjust the level using the TUNE/SCROLL or TUNE/FOLDER knob and then press the ENTER/SETTING or ENTER/AUDIO button to apply the adjustment.
How to read the displayed lines
Guiding lines which indicate the vehicle width and distances to objects with reference to the vehicle body line A are displayed on the monitor. Distance guide lines: Indicate distances from th ...

Difference between predicted and actual distances
Backing up on a steep uphill When backing up the vehicle up a hill, the distance guide lines and the vehicle width guide lines are shown closer than the actual distance. For example, the dis ...

Other materials:

Glass lid
Exploded View Panoramic roof glass Glass lid Side trim covers (LH/RH)  Front drain hose (LH/RH) Moonroof motor assembly Sunshade motor assembly  Moonroof front bracket (LH/RH) Moonroof rear bracket (LH/RH) Rear drain hose (LH/RH)  Moonroof unit assembly ...

CAN system (type 3)
MAIN LINE BETWEEN IPDM-E AND DLC CIRCUIT Diagnosis Procedure 1.CHECK CONNECTOR  Turn the ignition switch OFF. Disconnect the battery cable from the negative terminal.  Check the following terminals and connectors for damage, bend and loose connection (connector side and harn ...

C1170 variant coding
DTC Logic DTC DETECTION LOGIC DTC Display Item Malfunction detected condition Possible causes C1170 VARIANT CODING When the information in ABS actuator and electric unit (control unit) is not the same. ABS actuator and electric unit (control unit) DTC ...

© 2014-2022 Copyright www.nirogue.com