Nissan Rogue manuals

Nissan Rogue Service Manual: Accelerator Control System

Nissan Rogue Service Manual / Engine / Accelerator Control System

Removal and installation
STARTER MOTOR Exploded View REMOVAL Transaxle assembly Starter motor Lower bolt  Upper bolt Removal and Installation REMOVAL  Remove battery tray. Refer to PG-77, & ...

Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER" The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONE ...

Other materials:

Cooling fan
Exploded View Fan shroud Fan motor (LH)  Fan motor (RH)  Cooling fan (RH) Cooling fan (LH) Front Removal and Installation REMOVAL WARNING: Do not remove the radiator cap when the engine is hot. Serious burns could occur from high pressure engine coolant escap ...

Normal operating condition
Description FUEL CUT CONTROL (AT NO LOAD AND HIGH ENGINE SPEED) If the engine speed is above 1,800 rpm under no load (for example, the selector lever position is neutral and engine speed is over 1,800 rpm) fuel will be cut off after some time. The exact time when the fuel is cut off varies b ...

System description
CAN COMMUNICATION SYSTEM System Description CAN communication is a multiplex communication system. This enables the system to transmit and receive large quantities of data at high speed by connecting control units with two communication lines (CAN-H and CAN-L).  Control units o ...

© 2014-2025 Copyright www.nirogue.com